CakeFest 2024: The Official CakePHP Conference

Аргументы функции

Функция принимает информацию в виде списка аргументов — выражений через запятую. Аргументы вычисляются слева направо перед действительным вызовом функции. Такое вычисление называют энергичным.

PHP поддерживает передачу аргументов по значению (по умолчанию), передачу аргументов по ссылке, и значения по умолчанию. Списки аргументов переменной длины и именованные аргументы также поддерживаются.

Пример #1 Передача массивов в функции

<?php

function takes_array($input)
{
echo
"$input[0] + $input[1] = ", $input[0]+$input[1];
}

?>

Начиная с PHP 8.0.0 списку аргументов функции разрешается включать конечную запятую, которую парсер проигнорирует. Это полезно, когда список аргументов длинный или содержит длинные имена переменных, что в целях удобства подталкивает к вертикальному перечислению аргументов.

Пример #2 Список аргументов функции с конечной запятой

<?php

function takes_many_args(
$first_arg,
$second_arg,
$a_very_long_argument_name,
$arg_with_default = 5,
$again = 'a default string', // Конечная запятая не допускалась до PHP 8.0.0
) {
// ...
}

?>

Передача аргументов по ссылке

По умолчанию аргументы функции передаются по значению (поэтому если значение аргумента внутри функции изменится, значение не изменится за пределами функции). Аргументы передают по ссылке, чтобы разрешить функции изменять значения аргументов.

В описании функции перед именем параметра указывают амперсанд &, когда требуется передача аргумента по ссылке:

Пример #3 Передача аргументов по ссылке

<?php

function add_some_extra(&$string)
{
$string .= 'и кое-что ещё.';
}

$str = 'Это строка, ';
add_some_extra($str);
echo
$str; // Выведет «Это строка, и кое-что ещё.»

?>

Передача в виде аргумента значения в параметр, который ждёт ссылку, — ошибка.

Значения по умолчанию для параметров

Функция умеет определять для параметров значения по умолчанию, в этом помогает синтаксис, который похож на синтаксис присваивания значения переменной. Функция присвоит параметру значение по умолчанию, только если в параметр не передали аргумент; обратите внимание, что функция не присваивает параметру значение по умолчанию при передаче в параметр аргумента со значением null.

Пример #4 Значения по умолчанию для параметров в функциях

<?php

function makecoffee($type = "капучино")
{
return
"Готовим чашку $type.\n";
}

echo
makecoffee();
echo
makecoffee(null);
echo
makecoffee("эспрессо");

?>

Результат выполнения приведённого примера:

Готовим чашку капучино.
Готовим чашку .
Готовим чашку эспрессо.

Значениями по умолчанию для параметров разрешается указывать скалярные значения, массивы (array), специальный тип null и начиная с PHP 8.1.0 объекты, которые создают синтаксисом new ClassName().

Пример #5 Нескалярные типы как значения по умолчанию

<?php

function makecoffee($types = array("капучино"), $coffeeMaker = NULL)
{
$device = is_null($coffeeMaker)
?
"вручную"
: $coffeeMaker
;

return
"Готовлю чашку " . join(", ", $types) . " $device . \n";
}

echo
makecoffee();
echo
makecoffee(array("капучино", "лавацца"), "в чайнике");

?>

Пример #6 Объекты как значения по умолчанию, с PHP 8.1.0

<?php

class DefaultCoffeeMaker
{
public function
brew()
{
return
'Приготовление кофе.';
}
}

class
FancyCoffeeMaker
{
public function
brew()
{
return
'Приготовление прекрасного кофе только для вас.';
}
}

function
makecoffee($coffeeMaker = new DefaultCoffeeMaker)
{
return
$coffeeMaker->brew();
}

echo
makecoffee();
echo
makecoffee(new FancyCoffeeMaker);

?>

Значение по умолчанию должно быть константным выражением, а не, например, переменной, вызовом функции или метода класса.

Обратите внимание, что необязательные аргументы требуется указывать после обязательных аргументов, иначе необязательные аргументы не получится опустить при вызове. Рассмотрим следующий пример:

Пример #7 Неправильное определение значений по умолчанию для параметров функции

<?php

function makeyogurt($container = "миску", $flavour)
{
return
"Делаем $container с $flavour йогуртом.\n";
}

echo
makeyogurt("малиновым"); // Значение «малиновым» получит параметр $container, а не $flavour

?>

Результат выполнения приведённого примера:

Fatal error: Uncaught ArgumentCountError: Too few arguments
to function makeyogurt(), 1 passed in example.php on line 42

Теперь сравним приведённый пример со следующим примером:

Пример #8 Правильное определение значений по умолчанию для параметров функции

<?php

function makeyogurt($flavour, $container = "миску")
{
return
"Делаем $container с $flavour йогуртом.\n";
}

echo
makeyogurt("малиновым"); // Значение «малиновым» получит параметр $flavour

?>

Результат выполнения приведённого примера:

Делаем миску с малиновым йогуртом.

Начиная с PHP 8.0.0 для пропуска нескольких необязательных параметров передают именованные аргументы.

Пример #9 Правильное определение значений по умолчанию для параметров функции

<?php

function makeyogurt($container = "миску", $flavour = "малиновым", $style = "греческим")
{
return
"Делаем $container с $flavour $style йогуртом.\n";
}

echo
makeyogurt(style: "натуральным");

?>

Результат выполнения приведённого примера:

Делаем миску с малиновым натуральным йогуртом.

С PHP 8.0.0 объявление обязательных аргументов после необязательных устарело. Обычно из таких ситуаций выходят за счёт отказа от значения по умолчанию, поскольку функция никогда не присвоит параметру, в который передали аргумент, значение по умолчанию. Исключение из этого правила — аргументы вида Type $param = null, где null по умолчанию делает тип неявно обнуляемым. Такое определение остаётся допустимым, хотя рекомендуется указывать явный обнуляемый тип.

Пример #10 Объявление необязательных аргументов после обязательных аргументов

<?php

function foo($a = [], $b) {} // Функция не присвоит значение по умолчанию; устарело с PHP 8.0.0
function foo($a, $b) {} // Функционально эквивалентны, без уведомления об устаревании
function bar(A $a = null, $b) {} // Всё ещё разрешается; переменная $a обязательна, но допускает значение null
function bar(?A $a, $b) {} // Рекомендуется

?>

Замечание: Начиная с PHP 7.1.0 пропуск параметра, для которого не задали значение по умолчанию, выбрасывает исключение ArgumentCountError; в предыдущих версиях это выдавало предупреждение.

Замечание: Для параметров, которые ждут, что аргумент передадут по ссылке, разрешается устанавливать значения по умолчанию.

Списки аргументов переменной длины

PHP поддерживает в пользовательских функциях списки аргументов переменной длины, параметры для которых определяют оператором из трёх точек ..., который называется spread-оператором.

Списку параметров разрешается содержать оператор ..., чтобы показать, что функция принимает переменное количество аргументов. Переменная получит аргументы как массив:

Пример #11 Оператор ... для доступа к аргументам

<?php

function sum(...$numbers) {
$acc = 0;

foreach (
$numbers as $n) {
$acc += $n;
}

return
$acc;
}

echo
sum(1, 2, 3, 4);

?>

Результат выполнения приведённого примера:

10

Spread-оператор ... указывают также при вызове функции, чтобы распаковать в список аргументов массив (array), или распаковать переменную или литерал, которые принадлежат типу Traversable:

Пример #12 Передача аргументов через spread-оператор ...

<?php

function add($a, $b) {
return
$a + $b;
}

echo
add(...[1, 2])."\n";

$a = [1, 2];
echo
add(...$a);

?>

Результат выполнения приведённого примера:

3
3

Разрешается указывать стандартные позиционные параметры, а за ними параметр с оператором ..., тогда оператор ... сгенерирует и добавит в массив только конечные аргументы, позиции которых не совпали с позиционными аргументами.

Разрешается также добавлять перед оператором ... объявление типа. Тогда аргументы, которые захватил оператор ..., должны соответствовать типу параметра.

Пример #13 Аргументы с подсказкой типа

<?php

function total_intervals($unit, DateInterval ...$intervals) {
$time = 0;

foreach (
$intervals as $interval) {
$time += $interval->$unit;
}

return
$time;
}

$a = new DateInterval('P1D');
$b = new DateInterval('P2D');

echo
total_intervals('d', $a, $b).' days';

// Это не сработает, поскольку null — не объект класса DateInterval
echo total_intervals('d', null);

?>

Результат выполнения приведённого примера:

3 days
Catchable fatal error: Argument 2 passed to total_intervals() must be an instance of DateInterval, null given, called in - on line 14 and defined in - on line 2

В финале добавим, что разрешается также передавать аргументы переменной длины по ссылке, для этого перед оператором ... указывают амперсанд (&).

Именованные аргументы

В PHP 8.0.0 как расширение позиционных параметров появились именованные аргументы. Именованные аргументы передают в функцию на основе имени, а не позиции параметра. Назначение аргумента документирует само себя, аргументы перестают зависеть от порядка, в котором их передают, и разрешается произвольно пропускать значения по умолчанию.

Именованные аргументы передают по имени параметра, за которым идёт двоеточие и значение аргумента. Разрешается указывать зарезервированные ключевые слова как имена параметров. Имя параметра должно быть идентификатором, нельзя указывать динамические имена параметров.

Пример #14 Синтаксис именованного аргумента

<?php

myFunction
(paramName: $value);
array_foobar(array: $value);

// НЕ поддерживается
function_name($variableStoringParamName: $value);

?>

Пример #15 Позиционные аргументы по сравнению с именованными аргументами

<?php

// Передача позиционных аргументов:
array_fill(0, 100, 50);

// Передача именованных аргументов:
array_fill(start_index: 0, count: 100, value: 50);

?>

Порядок передачи именованных аргументов неважен.

Пример #16 Тот же пример, но с другим порядком аргументов

<?php

array_fill
(value: 50, count: 100, start_index: 0);

?>

Разрешается комбинировать именованные аргументы с позиционными. Тогда именованные аргументы должны идти после позиционных. Разрешается также передавать только часть необязательных аргументов функции, независимо от порядка аргументов.

Пример #17 Объединение именованных аргументов с позиционными аргументами

<?php

htmlspecialchars
($string, double_encode: false);

// То же самое
htmlspecialchars($string, ENT_QUOTES | ENT_SUBSTITUTE | ENT_HTML401, 'UTF-8', false);

?>

Передача одного и того же аргумента больше одного раза выбросит исключение Error.

Пример #18 Ошибка, которая возникает при передаче одного и того же параметра больше одного раза

<?php

function foo($param) {}

foo(param: 1, param: 2);
// Error: Named parameter $param overwrites previous argument

foo(1, param: 2);
// Error: Named parameter $param overwrites previous argument

?>

Начиная с PHP 8.1.0 разрешается передавать именованные аргументы после распаковки аргументов. Именованный аргумент не должен переопределять распакованный аргумент.

Пример #19 Пример передачи именованных аргументов после распаковки

<?php

function foo($a, $b, $c = 3, $d = 4) {
return
$a + $b + $c + $d;
}

var_dump(foo(...[1, 2], d: 40)); // 46
var_dump(foo(...['b' => 2, 'a' => 1], d: 40)); // 46
var_dump(foo(...[1, 2], b: 20)); // Fatal error: Named parameter $b overwrites previous argument

?>
add a note

User Contributed Notes 14 notes

up
122
php at richardneill dot org
8 years ago
To experiment on performance of pass-by-reference and pass-by-value, I used this script. Conclusions are below.

#!/usr/bin/php
<?php
function sum($array,$max){ //For Reference, use: "&$array"
$sum=0;
for (
$i=0; $i<2; $i++){
#$array[$i]++; //Uncomment this line to modify the array within the function.
$sum += $array[$i];
}
return (
$sum);
}

$max = 1E7 //10 M data points.
$data = range(0,$max,1);

$start = microtime(true);
for (
$x = 0 ; $x < 100; $x++){
$sum = sum($data, $max);
}
$end = microtime(true);
echo
"Time: ".($end - $start)." s\n";

/* Run times:
# PASS BY MODIFIED? Time
- ------- --------- ----
1 value no 56 us
2 reference no 58 us

3 valuue yes 129 s
4 reference yes 66 us

Conclusions:

1. PHP is already smart about zero-copy / copy-on-write. A function call does NOT copy the data unless it needs to; the data is
only copied on write. That's why #1 and #2 take similar times, whereas #3 takes 2 million times longer than #4.
[You never need to use &$array to ask the compiler to do a zero-copy optimisation; it can work that out for itself.]

2. You do use &$array to tell the compiler "it is OK for the function to over-write my argument in place, I don't need the original
any more." This can make a huge difference to performance when we have large amounts of memory to copy.
(This is the only way it is done in C, arrays are always passed as pointers)

3. The other use of & is as a way to specify where data should be *returned*. (e.g. as used by exec() ).
(This is a C-like way of passing pointers for outputs, whereas PHP functions normally return complex types, or multiple answers
in an array)

4. It's unhelpful that only the function definition has &. The caller should have it, at least as syntactic sugar. Otherwise
it leads to unreadable code: because the person reading the function call doesn't expect it to pass by reference. At the moment,
it's necessary to write a by-reference function call with a comment, thus:
$sum = sum($data,$max); //warning, $data passed by reference, and may be modified.

5. Sometimes, pass by reference could be at the choice of the caller, NOT the function definitition. PHP doesn't allow it, but it
would be meaningful for the caller to decide to pass data in as a reference. i.e. "I'm done with the variable, it's OK to stomp
on it in memory".
*/
?>
up
3
Simmo at 9000 dot 000
2 years ago
For anyone just getting started with php or searching, for an understanding, on what this page describes as a "... token" in Variable-length arguments:
https://www.php.net/manual/en/functions.arguments.php#functions.variable-arg-list
<?php

func
($a, ...$b)

?>
The 3 dots, or elipsis, or "...", or dot dot dot is sometimes called the "spread operator" in other languages.

As this is only used in function arguments, it is probably not technically an true operator in PHP. (As of 8.1 at least?).

(With having an difficult to search for name like "... token", I hope this note helps someone).
up
15
LilyWhite
2 years ago
It is worth noting that you can use functions as function arguments

<?php
function run($op, $a, $b) {
return
$op($a, $b);
}

$add = function($a, $b) {
return
$a + $b;
};

$mul = function($a, $b) {
return
$a * $b;
};

echo
run($add, 1, 2), "\n";
echo
run($mul, 1, 2);
?>

Output:
3
2
up
29
gabriel at figdice dot org
7 years ago
A function's argument that is an object, will have its properties modified by the function although you don't need to pass it by reference.

<?php
$x
= new stdClass();
$x->prop = 1;

function
f ( $o ) // Notice the absence of &
{
$o->prop ++;
}

f($x);

echo
$x->prop; // shows: 2
?>

This is different for arrays:

<?php
$y
= [ 'prop' => 1 ];

function
g( $a )
{
$a['prop'] ++;
echo
$a['prop']; // shows: 2
}

g($y);

echo
$y['prop']; // shows: 1
?>
up
14
Hayley Watson
6 years ago
There are fewer restrictions on using ... to supply multiple arguments to a function call than there are on using it to declare a variadic parameter in the function declaration. In particular, it can be used more than once to unpack arguments, provided that all such uses come after any positional arguments.

<?php

$array1
= [[1],[2],[3]];
$array2 = [4];
$array3 = [[5],[6],[7]];

$result = array_merge(...$array1); // Legal, of course: $result == [1,2,3];
$result = array_merge($array2, ...$array1); // $result == [4,1,2,3]
$result = array_merge(...$array1, $array2); // Fatal error: Cannot use positional argument after argument unpacking.
$result = array_merge(...$array1, ...$array3); // Legal! $result == [1,2,3,5,6,7]
?>

The Right Thing for the error case above would be for $result==[1,2,3,4], but this isn't yet (v7.1.8) supported.
up
12
boan dot web at outlook dot com
6 years ago
Quote:

"The declaration can be made to accept NULL values if the default value of the parameter is set to NULL."

But you can do this (PHP 7.1+):

<?php
function foo(?string $bar) {
//...
}

foo(); // Fatal error
foo(null); // Okay
foo('Hello world'); // Okay
?>
up
4
Luna
1 year ago
When using named arguments and adding default values only to some of the arguments, the arguments with default values must be specified at the end or otherwise PHP throws an error:

<?php

function test1($a, $c, $b = 2)
{
return
$a + $b + $c;
}

function
test2($a, $b = 2, $c)
{
return
$a + $b + $c;
}

echo
test1(a: 1, c: 3)."\n"; // Works
echo test2(a: 1, c: 3)."\n"; // ArgumentCountError: Argument #2 ($b) not passed

?>

I assume that this happens because internally PHP rewrites the calls to something like test1(1, 3) and test2(1, , 3). The first call is valid, but the second obviously isn't.
up
12
Sergio Santana: ssantana at tlaloc dot imta dot mx
18 years ago
PASSING A "VARIABLE-LENGTH ARGUMENT LIST OF REFERENCES" TO A FUNCTION
As of PHP 5, Call-time pass-by-reference has been deprecated, this represents no problem in most cases, since instead of calling a function like this:
myfunction($arg1, &$arg2, &$arg3);

you can call it
myfunction($arg1, $arg2, $arg3);

provided you have defined your function as
function myfuncion($a1, &$a2, &$a3) { // so &$a2 and &$a3 are
// declared to be refs.
... <function-code>
}

However, what happens if you wanted to pass an undefined number of references, i.e., something like:
myfunction(&$arg1, &$arg2, ..., &$arg-n);?
This doesn't work in PHP 5 anymore.

In the following code I tried to amend this by using the
array() language-construct as the actual argument in the
call to the function.

<?php

function aa ($A) {
// This function increments each
// "pseudo-argument" by 2s
foreach ($A as &$x) {
$x += 2;
}
}

$x = 1; $y = 2; $z = 3;

aa(array(&$x, &$y, &$z));
echo
"--$x--$y--$z--\n";
// This will output:
// --3--4--5--
?>

I hope this is useful.

Sergio.
up
11
jcaplan at bogus dot amazon dot com
18 years ago
In function calls, PHP clearly distinguishes between missing arguments and present but empty arguments. Thus:

<?php
function f( $x = 4 ) { echo $x . "\\n"; }
f(); // prints 4
f( null ); // prints blank line
f( $y ); // $y undefined, prints blank line
?>

The utility of the optional argument feature is thus somewhat diminished. Suppose you want to call the function f many times from function g, allowing the caller of g to specify if f should be called with a specific value or with its default value:

<?php
function f( $x = 4 ) {echo $x . "\\n"; }

// option 1: cut and paste the default value from f's interface into g's
function g( $x = 4 ) { f( $x ); f( $x ); }

// option 2: branch based on input to g
function g( $x = null ) { if ( !isset( $x ) ) { f(); f() } else { f( $x ); f( $x ); } }
?>

Both options suck.

The best approach, it seems to me, is to always use a sentinel like null as the default value of an optional argument. This way, callers like g and g's clients have many options, and furthermore, callers always know how to omit arguments so they can omit one in the middle of the parameter list.

<?php
function f( $x = null ) { if ( !isset( $x ) ) $x = 4; echo $x . "\\n"; }

function
g( $x = null ) { f( $x ); f( $x ); }

f(); // prints 4
f( null ); // prints 4
f( $y ); // $y undefined, prints 4
g(); // prints 4 twice
g( null ); // prints 4 twice
g( 5 ); // prints 5 twice

?>
up
1
tianyiw at vip dot qq dot com
1 year ago
<?php
/**
* Create an array using Named Parameters.
*
* @param mixed ...$values
* @return array
*/
function arr(mixed ...$values): array
{
return
$values;
}

$arr = arr(
name: 'php',
mobile: 123456,
);

var_dump($arr);
// array(2) {
// ["name"]=>
// string(3) "php"
// ["mobile"]=>
// int(123456)
// }
up
4
catman at esteticas dot se
8 years ago
I wondered if variable length argument lists and references works together, and what the syntax might be. It is not mentioned explicitly yet in the php manual as far as I can find. But other sources mention the following syntax "&...$variable" that works in php 5.6.16.

<?php
function foo(&...$args)
{
$i = 0;
foreach (
$args as &$arg) {
$arg = ++$i;
}
}
foo($a, $b, $c);
echo
'a = ', $a, ', b = ', $b, ', c = ', $c;
?>
Gives
a = 1, b = 2, c = 3
up
3
Hayley Watson
6 years ago
If you use ... in a function's parameter list, you can use it only once for obvious reasons. Less obvious is that it has to be on the LAST parameter; as the manual puts it: "You may specify normal positional arguments BEFORE the ... token. (emphasis mine).

<?php
function variadic($first, ...$most, $last)
{
/*etc.*/}

variadic(1, 2, 3, 4, 5);
?>
results in a fatal error, even though it looks like the Thing To Do™ would be to set $first to 1, $most to [2, 3, 4], and $last to 5.
up
1
info at keraweb dot nl
6 years ago
You can use a class constant as a default parameter.

<?php

class A {
const
FOO = 'default';
function
bar( $val = self::FOO ) {
echo
$val;
}
}

$a = new A();
$a->bar(); // Will echo "default"
up
2
John
17 years ago
This might be documented somewhere OR obvious to most, but when passing an argument by reference (as of PHP 5.04) you can assign a value to an argument variable in the function call. For example:

function my_function($arg1, &$arg2) {
if ($arg1 == true) {
$arg2 = true;
}
}
my_function(true, $arg2 = false);
echo $arg2;

outputs 1 (true)

my_function(false, $arg2 = false);
echo $arg2;

outputs 0 (false)
To Top